Llamar para preguntar el precio
Ubicación de la máquina:1617 317th StreetVermillion, South Dakota, Estados Unidos de America 57069
Información de Contacto del Vendedor
Ver Información del VendedorMasaba, Inc
Contacto:Sales Department
Teléfono:+1 605-624-9555
Vermillion, South Dakota, Estados Unidos de America 57069
General
Año
2026
Fabricante
MASABA
Horas
0
Modelo
TU48
Número de serie
2026568
Condición
Nuevo
Descripción
LOAD AREA
• Self-Relieving Load Area
• Grate – Constructed of heavy-duty flat bar, 10’ x 5’ outside dimension
• Two Ramp System – Located on each side of the loading area.
• Includes (2) Self-Cleaning Ramps – Hinged on each side of grate, hydraulically folding for cleaning after each loading and travel
• Includes (2) Outer ramps – 10’ wide by 9’ long, put in place manually with loader, stored inside folding ramp for travel
CHASSIS
• Frame – Constructed of heavy-duty steel tubing
• Tandem Axle – Tandem walking beam with (8) 11x22.5R tires
• Landing Jacks – Hydraulic landing legs
• Road Portable Package – Including 5th wheel hitch, brakes, lights and mud flaps
48” DISCHARGE CONVEYOR
• Capacity – 1,000 STPH of 100 PCF material, 1.5” minus spherical lumps
• Belt Speed – 225 FPM
• Conveyor & Slip Tube – Hydraulic raise and lower, 11’ maximum discharge height
• Frame – Channel frame
• Drive – Dual Class II head drive with V-belts and guard
• Gear Reducers – (2) Dodge shaft mount reducers with sheaves, bushings, and backstops
• Motors – (2) WEG 25hp 1800rpm
• Flow Control – Manual adjustable slide gate
• Steel Hold Down Wheels
• Loading Area Idlers – PPI, CEMA C5, flat carrier idlers
• Transition Idlers – PPI, CEMA C5, 20°, sealed, trough idlers
• Troughing Idlers – PPI, CEMA C5, 35°, sealed, trough idlers
• Return Idlers – PPI, CEMA C5, sealed, rubber disc return idlers
• Drive Pulley – PPI heavy-duty, 20” diameter, drum pulley with 3/8" HB lagging
• Tail Pulley – PPI heavy-duty, 14” diameter, self-cleaning wing pulley
• Snub Pulley – PPI heavy-duty, 14” diameter, drum pulley with 3/8” smooth rubber lagging
• Bearings – Dodge bearings
• Take Ups – Screw-type
• Belting – 3-ply 330 PIW 3/16 x 1/16
• Belt Splice – Vulcanized Splice
• Belt Scraper – Flexco EZP1
• Discharge Hood – 1/4” mild steel with 1/4” AR countersunk bolt in liners, to feed 36” belt width or greater
GENERAL SPECIFICATIONS
• Hydraulic Unit – 20hp electric pumping unit to hydraulically control ramps, including continuous cycling and hot climate protection, 24V solenoids
• Electric Start Gas-Powered Unit – To manually operate hydraulic landing legs, conveyor raise/lower, and hinged ramp raise/lower, independently, to remove from truck and setup
• Electrical – 480V/3ph/60Hz enclosed panel. Includes main disconnect, circuit breaker and push button on/off switches with soft start. Mounted to chassis. With 100’ lead cord
• Guards – Typical guards supplied on return idlers, tail pulley, load zone, v-belt and head pulley. We do not guarantee that our guards will meet all local codes. It is the owner’s responsibility to have them inspected locally. Guards painted Safety Yellow RAL1012
• Owner’s Manual – (1) copy in English for maintenance and parts
• Steel Shot Blasted
• Primer – (1) coat of 2-part urethane primer
• Paint – (1) coat of 2-part urethane paint
Paint Option
☒ Beige (RAL 1015)
Options Taken
☒ (2) Wireless Remote-Control System
☒ Central Lube System
Dimensiones de Envío
Altura de envío
398.78 cm
Longitud de envío
1,968.5 cm
Peso de envío
22,906.41 kg
Ancho de envío
365.76 cm